不错呦！smile@林凯西，确保“准备文件”中的几个文件都有安装，S...您好，看了您这篇帖子觉得很有帮助。但是有个问题想请...我的修改过了怎么还被恶意注册呢 @jjjjiiii 用PJ快9年了，主要是A...PJ3啊，貌似很少有人用PJ了，现在不是WP就是z...@332347365，我当时接入时错误码没有-10...楼主，ChkValue值应为-103是什么意思呢？...大哥 你最近能看到我发的信息，请跟我联系，我有个制...
Check .NET Version with Inno Setup[转]
编辑:dnawo 日期:2016-10-31
Inno Setup by Jordan Russell is a great installation scripting program, but lacks a built-in function to determine the .NET Framework version installed on the target machine. Fortunately, it’s easy to write such a function using Inno Setup’s Pascal scripting language.
The Versions
Microsoft maintains a set of registry keys that indicate the installed .NET Framework versions and service packs. C# MVP Scott Dorman has posted a list comprising versions 1.0 through 4.0 (at the time of this writing) in this Stack Overflow thread. The required registry keys are quite similar for most .NET Framework versions except 1.0. We’ll ignore that version which has been obsoleted by 1.1 anyway.
Versions 4.5 and newer are somewhat tricky since they install as in-place updates for version 4.0 and reuse the exact same registry keys. The official MSDN page How to: Determine Which .NET Framework Versions Are Installed suggests checking for the presence of DWORD value Release, so that’s what I’m doing below. An alternative would be to examine the REG_SZ value Version which equals 4.0.30319 for .NET 4.0, 4.5.50709 for .NET 4.5, and 4.6.00079 for .NET 4.6. (Sadly, I didn’t think to record the version strings for 4.5.1 & 4.5.2 while I had them installed.)
Versions 4.5.1 and 4.6.x introduce an additional complication: there are two possible Release values, depending on the Windows version! The script handles this by treating all queries for versions 4.5 or newer as minimum requirements, i.e. they will succeed if the Release value is equal to or greater than the specified version’s minimum value on any system. Queries for .NET 4.0 are also fulfilled by .NET 4.5 or newer, due to the latter installing as in-place updates. Queries for older versions require exact matches, i.e. they are not fulfilled by .NET 4.0 or newer even if the application would be compatible.
The Script
In the following Inno Setup scripting code block, function IsDotNetDetected checks whether the specified .NET Framework version and at least the specified service pack level are installed. All listed version strings are for final release versions; betas and release candidates typically have different version numbers. Function InitializeSetup demonstrates how to use IsDotNetDetected to check for .NET Framework 4.6 without service packs.
I’m placing this small bit of code in the public domain, so you may embed it in your own projects, modify and redistribute it as you see fit.
相关链接
[1].Check .NET Version with Inno Setup：http://kynosarges.org/DotNetVersion.html
[2].Inno Setup 检测已安装的.NET Framework 版本：http://www.cnblogs.com/oldfarmer/p/5797130.html
[3].如何：确定计算机安装了哪些 .NET Framework 版本：http://www.mzwu.com/article.asp?id=4252
The Versions
Microsoft maintains a set of registry keys that indicate the installed .NET Framework versions and service packs. C# MVP Scott Dorman has posted a list comprising versions 1.0 through 4.0 (at the time of this writing) in this Stack Overflow thread. The required registry keys are quite similar for most .NET Framework versions except 1.0. We’ll ignore that version which has been obsoleted by 1.1 anyway.
Versions 4.5 and newer are somewhat tricky since they install as in-place updates for version 4.0 and reuse the exact same registry keys. The official MSDN page How to: Determine Which .NET Framework Versions Are Installed suggests checking for the presence of DWORD value Release, so that’s what I’m doing below. An alternative would be to examine the REG_SZ value Version which equals 4.0.30319 for .NET 4.0, 4.5.50709 for .NET 4.5, and 4.6.00079 for .NET 4.6. (Sadly, I didn’t think to record the version strings for 4.5.1 & 4.5.2 while I had them installed.)
Versions 4.5.1 and 4.6.x introduce an additional complication: there are two possible Release values, depending on the Windows version! The script handles this by treating all queries for versions 4.5 or newer as minimum requirements, i.e. they will succeed if the Release value is equal to or greater than the specified version’s minimum value on any system. Queries for .NET 4.0 are also fulfilled by .NET 4.5 or newer, due to the latter installing as in-place updates. Queries for older versions require exact matches, i.e. they are not fulfilled by .NET 4.0 or newer even if the application would be compatible.
The Script
In the following Inno Setup scripting code block, function IsDotNetDetected checks whether the specified .NET Framework version and at least the specified service pack level are installed. All listed version strings are for final release versions; betas and release candidates typically have different version numbers. Function InitializeSetup demonstrates how to use IsDotNetDetected to check for .NET Framework 4.6 without service packs.
I’m placing this small bit of code in the public domain, so you may embed it in your own projects, modify and redistribute it as you see fit.
复制内容到剪贴板
程序代码
程序代码[Code]
function IsDotNetDetected(version: string; service: cardinal): boolean;
// Indicates whether the specified version and service pack of the .NET Framework is installed.
//
// version -- Specify one of these strings for the required .NET Framework version:
// 'v1.1' .NET Framework 1.1
// 'v2.0' .NET Framework 2.0
// 'v3.0' .NET Framework 3.0
// 'v3.5' .NET Framework 3.5
// 'v4\Client' .NET Framework 4.0 Client Profile
// 'v4\Full' .NET Framework 4.0 Full Installation
// 'v4.5' .NET Framework 4.5
// 'v4.5.1' .NET Framework 4.5.1
// 'v4.5.2' .NET Framework 4.5.2
// 'v4.6' .NET Framework 4.6
// 'v4.6.1' .NET Framework 4.6.1
// 'v4.6.2' .NET Framework 4.6.2
//
// service -- Specify any non-negative integer for the required service pack level:
// 0 No service packs required
// 1, 2, etc. Service pack 1, 2, etc. required
var
key, versionKey: string;
install, release, serviceCount, versionRelease: cardinal;
success: boolean;
begin
versionKey := version;
versionRelease := 0;
// .NET 1.1 and 2.0 embed release number in version key
if version = 'v1.1' then begin
versionKey := 'v1.1.4322';
end else if version = 'v2.0' then begin
versionKey := 'v2.0.50727';
end
// .NET 4.5 and newer install as update to .NET 4.0 Full
else if Pos('v4.', version) = 1 then begin
versionKey := 'v4\Full';
case version of
'v4.5': versionRelease := 378389;
'v4.5.1': versionRelease := 378675; // 378758 on Windows 8 and older
'v4.5.2': versionRelease := 379893;
'v4.6': versionRelease := 393295; // 393297 on Windows 8.1 and older
'v4.6.1': versionRelease := 394254; // 394271 on Windows 8.1 and older
'v4.6.2': versionRelease := 394802; // 394806 on Windows 8.1 and older
end;
end;
// installation key group for all .NET versions
key := 'SOFTWARE\Microsoft\NET Framework Setup\NDP\' + versionKey;
// .NET 3.0 uses value InstallSuccess in subkey Setup
if Pos('v3.0', version) = 1 then begin
success := RegQueryDWordValue(HKLM, key + '\Setup', 'InstallSuccess', install);
end else begin
success := RegQueryDWordValue(HKLM, key, 'Install', install);
end;
// .NET 4.0 and newer use value Servicing instead of SP
if Pos('v4', version) = 1 then begin
success := success and RegQueryDWordValue(HKLM, key, 'Servicing', serviceCount);
end else begin
success := success and RegQueryDWordValue(HKLM, key, 'SP', serviceCount);
end;
// .NET 4.5 and newer use additional value Release
if versionRelease > 0 then begin
success := success and RegQueryDWordValue(HKLM, key, 'Release', release);
success := success and (release >= versionRelease);
end;
result := success and (install = 1) and (serviceCount >= service);
end;
function InitializeSetup(): Boolean;
begin
if not IsDotNetDetected('v2.0', 0) then begin
MsgBox('MyApp requires Microsoft .NET Framework 2.0.'#13#13
'Please use Windows Update to install this version,'#13
'and then re-run the MyApp setup program.', mbInformation, MB_OK);
result := false;
end else begin
result := true;
end
end;
function IsDotNetDetected(version: string; service: cardinal): boolean;
// Indicates whether the specified version and service pack of the .NET Framework is installed.
//
// version -- Specify one of these strings for the required .NET Framework version:
// 'v1.1' .NET Framework 1.1
// 'v2.0' .NET Framework 2.0
// 'v3.0' .NET Framework 3.0
// 'v3.5' .NET Framework 3.5
// 'v4\Client' .NET Framework 4.0 Client Profile
// 'v4\Full' .NET Framework 4.0 Full Installation
// 'v4.5' .NET Framework 4.5
// 'v4.5.1' .NET Framework 4.5.1
// 'v4.5.2' .NET Framework 4.5.2
// 'v4.6' .NET Framework 4.6
// 'v4.6.1' .NET Framework 4.6.1
// 'v4.6.2' .NET Framework 4.6.2
//
// service -- Specify any non-negative integer for the required service pack level:
// 0 No service packs required
// 1, 2, etc. Service pack 1, 2, etc. required
var
key, versionKey: string;
install, release, serviceCount, versionRelease: cardinal;
success: boolean;
begin
versionKey := version;
versionRelease := 0;
// .NET 1.1 and 2.0 embed release number in version key
if version = 'v1.1' then begin
versionKey := 'v1.1.4322';
end else if version = 'v2.0' then begin
versionKey := 'v2.0.50727';
end
// .NET 4.5 and newer install as update to .NET 4.0 Full
else if Pos('v4.', version) = 1 then begin
versionKey := 'v4\Full';
case version of
'v4.5': versionRelease := 378389;
'v4.5.1': versionRelease := 378675; // 378758 on Windows 8 and older
'v4.5.2': versionRelease := 379893;
'v4.6': versionRelease := 393295; // 393297 on Windows 8.1 and older
'v4.6.1': versionRelease := 394254; // 394271 on Windows 8.1 and older
'v4.6.2': versionRelease := 394802; // 394806 on Windows 8.1 and older
end;
end;
// installation key group for all .NET versions
key := 'SOFTWARE\Microsoft\NET Framework Setup\NDP\' + versionKey;
// .NET 3.0 uses value InstallSuccess in subkey Setup
if Pos('v3.0', version) = 1 then begin
success := RegQueryDWordValue(HKLM, key + '\Setup', 'InstallSuccess', install);
end else begin
success := RegQueryDWordValue(HKLM, key, 'Install', install);
end;
// .NET 4.0 and newer use value Servicing instead of SP
if Pos('v4', version) = 1 then begin
success := success and RegQueryDWordValue(HKLM, key, 'Servicing', serviceCount);
end else begin
success := success and RegQueryDWordValue(HKLM, key, 'SP', serviceCount);
end;
// .NET 4.5 and newer use additional value Release
if versionRelease > 0 then begin
success := success and RegQueryDWordValue(HKLM, key, 'Release', release);
success := success and (release >= versionRelease);
end;
result := success and (install = 1) and (serviceCount >= service);
end;
function InitializeSetup(): Boolean;
begin
if not IsDotNetDetected('v2.0', 0) then begin
MsgBox('MyApp requires Microsoft .NET Framework 2.0.'#13#13
'Please use Windows Update to install this version,'#13
'and then re-run the MyApp setup program.', mbInformation, MB_OK);
result := false;
end else begin
result := true;
end
end;
相关链接
[1].Check .NET Version with Inno Setup：http://kynosarges.org/DotNetVersion.html
[2].Inno Setup 检测已安装的.NET Framework 版本：http://www.cnblogs.com/oldfarmer/p/5797130.html
[3].如何：确定计算机安装了哪些 .NET Framework 版本：http://www.mzwu.com/article.asp?id=4252
上一篇: 中国联通3G用户专享存费送费活动
下一篇: Inno Setup检测安装.Net Framework运行环境脚本
文章来自: Kynosarges
引用通告: 查看所有引用 | 我要引用此文章
Tags: 
最新日志:
评论: 0 | 引用: 0 | 查看次数: 15658
发表评论
请登录后再发表评论！
